Advertisement
Tooth Tube Bracket
Assembly
S-Tine Machines:
Assemble five 9J091 S-Tine Brackets to the front vertical
tube supports top and middle holes using 1/2-13 X 5
Bolts and Locknuts. On the rear vertical tube supports
top and middle holes assemble five 9J091 S-Tine
Brackets and Spacers using 1/2-13 X 6-1/2 Bolts and
Locknuts. See Figure 2-8.
S-TINE MACHINES FRONT
Locknut,1/2-13
S-Tine Bracket
9J091
C-Tooth Bracket
2-10
TABLE OF CONTENTS
Use Top and
Middle Holes
HHCS,1/2-13 x 5
Figure 2-8: S-Tine Bracket Assembly
C-TOOTH MACHINES
Locknut,1/2-13
9J090
Figure 2-9: C-Tooth Bracket Assembly
C-Tooth Machines:
Assemble ten 9J090 C-Tooth Brackets to the front and
rear vertical middle and bottom holes tube supports using
1/2-13 X 5 Bolts and Locknuts. See Figure 2-9.
Figure 2-10 shows the proper positioning of these
brackets when assembled. The brackets must be
assembled exactly as shown in the illustration.
(Reversing some of these brackets will cause
interference later when mounting spring teeth.)
S-TINE MACHINES REAR
Locknut,1/2-13
S-Tine Bracket
9J091
Spacer
Use Middle and
Bottom Holes
HHCS,1/2-13 x 5
Use Top and
Middle Holes
HHCS,1/2-13 x 6-1/2
9J577-0822
Advertisement
