Advertisement
Center Roller Installation
The longer roller is installed on the Left Rear.
Insert the front and rear roller assembly ends, without the
Clamp Ring into Center Bracket Bearings.
NOTE
Be sure clamp rings are towards the outside, so assembly
can be adjusted when needed.
U-Bolt,3/4-10
Nut,
3/4-10
Right Front Roller
2-36
TABLE OF CONTENTS
End Bracket Assm
Lock Washer,3/4
Center
Bracket
Left Front Roller
Figure 2-34: Center Roller Installation
Install End Bracket with the bearing to the inside on the
Front Frame Tube, and the End Bracket Assembly with
the bearing on the outside on the Rear Frame Tube using
3/4-10 U-bolts, Lock Washers and Nuts.
NOTE
Crowfoot wheels have arrows on the spokes showing
direction of rotation. Arrows must follow direction of travel.
Right Rear Rollers
U-Bolt,3/4-10
End Bracket
Center Bracket
Left Rear
(Longer Roller)
End
Bracket Assm
Lock Washer
Nut,3/4-10
9J577-0822
Advertisement
