Advertisement
Rockshaft and Drawbar
Transport Locks
CAUTION
Ensure both Rockshaft Transport Locks are either
locked or unlocked. Failure to lock both Transport
Locks may result in damage to the machine.
Ensure the Drawbar Transport Lock is unlocked
before lowering the machine. Failure to remove the
Pin will result in damage to the drawbar and frame.
Road to Field
1. With machine still raised fully, unfold wings.
2. Remove Drawbar Transport Lock Clevis Pin and Hair
Pin and place it in the storage position in the Frame
Lug top hole.
3. Raise machine slightly to loosen Rockshaft Transport
Lock Clevis Pin. Remove Clevis Pin from slot and
insert it into the storage hole located above the slot in
the Rear Frame Tube Lugs. Insert Hair Pin.
Field to Road
1. Raise machine fully, fold wings.
2. Remove Rockshaft Transport Lock Clevis Pin from
storage hole located above the slot in the Rear Frame
Tube Lugs. With Flat Washers on both sides of the
slot, insert Clevis Pin into Lug slot and through the
Transport Lock hole. Insert Hair Pin.
3. Remove Drawbar Transport Lock Clevis Pin and Hair
Pin for storage position in the Frame Lug and place it
in the top hole of the drawbar side plate. See
Figures 3-3 and 3-4.
9J577-0822
TABLE OF CONTENTS
Flat
Washer
Transport
Lock
Transport Lock Pin
LOCKED Position
Flat Washer
Clevis
Pin
Hair Pin
Clevis Pin
Flat Washer
Transport Axle
Hair Pin
Flat
Washer
Transport Lock
Transport Lock Pin
STORAGE Position
Figure 3-3: Transport Lock
Transport
Axle
Cylinder
Cylinder
3-5
Advertisement
