14. Connect the electrical harness to connector (A)
(located beside the forward valve block on the
windrower).
NOTE:
Valve block hidden to show the electrical
connector.
15. Move the windrower platform (A) to the CLOSED
position.
5.7.3 Attaching the Header (M200 Windrowers)
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
Refer to your windrower operator's manual for procedures to mechanically attach the header to the windrower. Refer
to the following procedures for electrical and hydraulic connections:
169455
OPERATION
Figure 5.34: Electrical Connection
Figure 5.35: Windrower LH Platform
41
Revision F