MacDon R85 Operator's Manual page 75

9. Disconnect the electrical connector (A) by turning
the collar counterclockwise and pulling connector to
disengage.
NOTE:
Hydraulic lines and hoses hidden on illustration
to show the electrical connection.
10. Move the hose bundle from header to the left-side (cab
forward) hose support (B).
11. Rotate lever (A) clockwise and push to engage bracket.
12. Route the electrical harness through the hose support
(B) and attach cap to electrical connector (C).
169455
OPERATION
Figure 5.82: Electrical Connection
Figure 5.83: Hose Bundle
65
Revision F