MacDon R85 Operator's Manual page 50

8. Lower holder (A) onto sleeves (B) so that flats locate on
holder. Holder can be adjusted by loosening bolts (C).
Tighten bolts after adjusting.
9. Insert lynch pin (A) to secure lock.
10. Attach case drain hose coupler at (B).
11. Proceed to Step
14., page
12. Connect large hoses to the lines at (A) and (B) as
shown using fittings (C). Torque fittings to 135 lbf-ft
(183 N·m).
13. Attach case drain hose and coupler (D) to (E).
169455
OPERATION
41.
Figure 5.31: Hydraulic Couplers
Figure 5.32: Hydraulic Couplers
Figure 5.33: Hydraulic Couplers
40
Revision F