MacDon R85 Operator's Manual page 48

1. Move windrower left-hand (cab-forward) platform (A) to
OPEN position.
2. Route the hose bundle (A) from the header, under
the windrower frame and insert pin (B) into hole in
windrower frame.
3. Place hoses on support (C).
4. If optional couplers and lock are installed on hoses and
lines, proceed as follows. Otherwise, proceed to Step
12., page 40.
169455
OPERATION
Figure 5.26: Windrower LH Platform
Figure 5.27: Hydraulic Hoses
38
Revision F