MacDon R85 Operator's Manual page 71

10. Disconnect the
hydraulic motor:
• Pressure hose (A)
• Return hose (B)
• Case drain hose (C)
11. Install caps on the connectors and hose ends
(if equipped).
NOTE:
Hydraulic hoses from the header hidden on
illustration for clarity.
12. Move the hose bundle from header to the left-side (cab
forward) hose support (B).
13. Rotate lever (A) clockwise and push to engage bracket.
14. Route the electrical harness through the hose support
(B) and attach cap to electrical connector (C).
169455
following hoses from
OPERATION
the
Figure 5.75: Hydraulic Connections
Figure 5.76: Hose Bundle
61
Revision F