MacDon R85 Operator's Manual page 133

10. Verify that drain plug (A) has been installed, before
adding new lubricant.
Figure 7.27: Cutterbar Filler Plug Locations
11. Locate one of the two filler plugs along the top of
the cutterbar. Refer to
Locations, page 123.
12. Clean around either filler plug (A) and remove one plug
with an 8 mm hex key.
NOTE:
Rotate disc to expose filler plug if necessary.
169455
MAINTENANCE AND SERVICING
7.27: Cutterbar Filler Plug
Figure 7.26: Cutterbar Drain Plug
123
Revision F