Attaching The Header: M200 Windrowers - MacDon R85 Operator's Manual
Rotary disc 13-foot header for self-propelled windrower
Hide thumbs
Also See for R85:
- Operator's manual (220 pages) ,
- Assembly instructions manual (122 pages) ,
- Unloading and assembly instructions (55 pages)
Table of Contents
Advertisement
18. Move
the
windrower
CLOSED position.
3.7.3 Attaching the Header: M200 Windrowers
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator's seat for any reason.
Refer to
3.7 Attaching the Header, page 37
to the following procedures for electrical and hydraulic connections:
To operate the 13-foot header on an M200 windrower,
installation of a motor/hose kit (MD #B5511) is required.
If required, obtain the kit through your MacDon Dealer.
Install kit in accordance with the supplied instructions.
147757
OPERATION
platform
(A)
to
the
for procedure to mechanically attach the header to the windrower. Refer
44
Figure 3.35: Windrower with LH Platform in
Closed Position
Figure 3.36: MD #B5511 Hydraulic Drive Kit
Revision B
Advertisement
Table of Contents
