Attaching The Header; Attaching The Forming Shield - MacDon R85 Operator's Manual

5.7 Attaching the Header

5.7.1 Attaching the Forming Shield

DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
To attach the forming shield to the windrower, follow
these steps:
1. Stop engine and remove key.
2. Remove the two clevis pins (A) from forming shield
forward end.
3. Position the forming
windrower frame.
169455
OPERATION
shield (A) under the
Figure 5.20: Forming Shield
Figure 5.21: Forming Shield under Windrower
35
Revision F