Maintenance Schedule/Record - MacDon R85 Operator's Manual

7.5.1 Maintenance Schedule/Record

Action:
Hour meter reading



First use
100 hours or annually
Conditioner drive belt - refer to

Inspecting the Conditioner Drive
Belt, page 146.
Bevel gearbox lube level - refer
 to
7.5.7 Lubrication and Servicing
Intervals, page 116.
End of season
10 hours or daily
Hydraulic hoses and lines - refer to

7.8.2 Hydraulic Hoses and Lines,
page 155.
Cutter blades, deflectors, and discs
 - refer to
7.6.1 Inspecting the
Cutterbar Discs, page
25 hours
Roll universal shafts - refer to

Lubrication and Servicing, page
Cutterbar driveline universals - refer
 to
7.5.5 Lubrication and Servicing,
page 114.
50 hours
Cutterbar lube first 50 and 150
▲ hours - refer to
7.5.8 Lubricating the
Cutterbar, page 120.
Bevel gearbox lube level first 50 and
▲
150 hours - refer to
and Servicing Intervals, page
169455
MAINTENANCE AND SERVICING
 - Check
Service date
Serviced by
Refer to
Refer to
Refer to
NOTE:
MacDon recommends keeping a record of daily maintenance
126.
as evidence of a properly maintained machine, however daily
maintenance records are not required to meet normal warranty
conditions.
7.5.5
114.
7.5.7 Lubrication
116.
 - Lubricate
7.5.2 Break-In Inspections, page
7.5.3 Preseason/Annual Service, page
7.5.4 End-of-Season Service, page
111
▲ - Change
113.
113.
114.
Revision F