Definitions - MacDon R85 Operator's Manual

2 Definitions
The following terms and acronyms may be used in this manual.
Term
API
ASTM
Bolt
Cab-forward
CDM
Center-link
CGVW
DWA
Export header
Finger tight
FFFT
GSL
GVW
Hard joint
Header
Hex key
hp
ISC
JIC
n/a
Nut
N-DETENT
North American header
NPT
ORB
169455
Definition
American Petroleum Institute
American Society of Testing and Materials
A headed and externally threaded fastener that is designed to be paired with a nut
Windrower operation with the Operator and cab facing in the direction of travel
Cab display module on a self-propelled windrower
A hydraulic cylinder link between the header and the machine to which it is attached:
It is used to change header angle
Combined vehicle gross weight
Double Windrow Attachment
Header configuration typical outside North America
Finger tight is a reference position where sealing surfaces or components are
making contact with each other and the fitting has been tightened to a point where
the fitting is no longer loose
Flats from finger tight
Ground speed lever
Gross vehicle weight
A joint made with the use of a fastener where the joining materials are
highly incompressible
A machine that cuts and lays crop into a windrow and is attached to a
self-propelled windrower
A hex key or Allen key (also known by various other synonyms) is a tool of
hexagonal cross-section used to drive bolts and screws that have a hexagonal
socket in the head (internal-wrenching hexagon drive)
Horsepower
Intermediate Speed Control
Joint Industrial Council: a standards body that developed the standard sizing and
shape for original 37° flared fitting
Not applicable
An internally threaded fastener that is designed to be paired with a bolt
The slot opposite the NEUTRAL position on operator's console
Header configuration typical in North America
National Pipe Thread: a style of fitting used for low pressure port openings. Threads
on NPT fittings are uniquely tapered for an interference fit
O-ring boss: a style of fitting commonly used in port opening on manifolds, pumps
and motors
15
Revision F