Driveshields; Opening The Driveshield: North American Headers; Closing The Driveshield: North American Headers - MacDon R85 Operator's Manual

5.4 Driveshields

WARNING
Do NOT operate the machine with the driveshields open. High speed rotating components may throw
debris and could result in death or serious injury.
The R85 13-Foot Header for Self-Propelled Windrower comes in two configurations—one configured for use in
North America and one configured for use outside of North America. The configuration is specified in the title
when necessary.

5.4.1 Opening the Driveshield: North American Headers

Follow these steps to open the driveshield (A) on North American headers:
1. Disengage rubber latch (B) from hook (C).
2. Lift driveshield (A) to the open position.

5.4.2 Closing the Driveshield: North American Headers

Follow these steps to close the driveshield on North American headers:
1. Lower driveshield (A) so that tabs at lower end of shield
engage holes in lower panel.
2. Engage rubber latch (B) on hook (C).
169455
OPERATION
Figure 5.5: Driveshield
Figure 5.6: Driveshield
26
Revision F