Attaching The Header; Attaching The Forming Shield - MacDon R85 Operator's Manual

5.7 Attaching the Header

5.7.1 Attaching the Forming Shield

To attach the forming shield to the windrower, follow
these steps.
1. Remove the two clevis pins (A) from forming shield
forward end.
DANGER
Stop engine and remove key from ignition before
leaving operator's seat for any reason. A child or
even a pet could engage an idling machine.
2. Stop engine and remove key.
3. Position the forming
windrower frame.
169457
OPERATION
shield (A) under the
Figure 5.22
Figure 5.23
40
Rev. F