Table of Contents
Advertisement
Select Boot Configuration
The [Select Boot Configuration] menu appears first. You may also click the [Select Boot
Configuration] tab to open this page. On this page, you can select or edit the existing boot
configuration and apply it to the desired CPU blade.
NOTE:
is referred as "Boot Config".
Indications
Indicates the size of installed CPU blade (height, width, and I/O blade), boot config setting, and
apply result (Success/Fail/Please (re)boot, executed time) for each CPU blade slot.
Select Boot Configuration
The pulldown menu allows you to select the boot config for each CPU blade slot.
The boot config marked with an asterisk is currently applied to the relevant CPU blade slot.
The normal boot config can be applied to a single blade slot only. To apply the same boot config to
several blade slots, a specific boot config is required.
If you select a normal boot config that has already been applied to any other blade slot, the blade
slot to which the relevant boot config is applied is replaced with the normal boot config that has
been applied to the relevant blade slot.
In the EM card boot control feature, boot control information
-
165
-
Advertisement
Table of Contents
