If the entered password does not match the registered password, the error message as shown below
appears.
Press the <Esc> key to go back to the [Blade Selection Menu].
When the [Blade Control Menu] starts, the window as shown below appears.
Press the <Esc> key to go back to the [Blade Selection Menu].
Indicates the slot number, status, and name of the selected CPU blade.
IMPORTANT:
NEC Express5800/120Bb-m6), the Blade Control menu is unavailable
for the slot to the right of the installed slot. Use this menu on the left
slot.
When the installed CPU blade occupies two slots (e.g.,
- 332 -