Apply
Click the [Apply] button at bottom of the screen to save the modified information in the
configuration file and apply it to EM card. When two EM cards are installed, the settings are applied
to both cards.
When you click the [Apply] button, the information on the Web screen is verified. If no problem is
found, the data is written into configuration file (/var/nvdata/rw_poem.conf) and applied to the EM
card.
NOTE:
displayed at the top of the page. The item that has a problem is
indicated with red color, as shown in the figure below.
If any problem is found in the information, an error message is
- 252 -