Table of Contents
Advertisement
Safety Notes
Observe the following notes to install or remove the EM card safely and properly.
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages i to
v for details.
Keep any component in an anti-static bag until you actually install it to Blade Enclosure.
Hold a component by its edge to avoid touching any terminals or parts.
To store or carry any component, place it in an anti-static bag.
Preparation for Installation/Removal
Prepare the Phillips screwdriver before starting installation or removal.
If the EM cards are not in redundant configuration, the configuration data before replacement will
be lost. You must reconfigure the EM card after replacement.
NOTES:
We recommend you to make backup copy of configuration data of
EM card when configuration completes.
For backup/restore procedure, see "Backup Configuration" or
"Restore Configuration" in Chapter 4, or "Backup of EM
Configuration File" or "Restoring EM Configuration File" in
Chapter 5.
Do not disassemble, repair, or alter the server.
Unplug the power cord before working with the server.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages i to v for details.
Make sure to complete installation.
Do not pinch your finger(s) with component.
WARNING
CAUTION
- 18 -
Advertisement
Table of Contents
