Table of Contents
Advertisement
Installation/Removal Procedure
Install or remove the EM card in the following procedure.
Take following steps to install the EM card into the EM card slot of the Blade Enclosure.
Installation
Install the EM card in the following procedure.
1.
Prepare for installation according to "Preparation for Installation/Removal".
2.
Loosen the thumb nut on the SIGMABLADE monitor, and open the cover.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages i to v for details.
Make sure to complete installation.
Do not pinch your finger(s) with component.
CAUTION
Thumb nut
-
19
-
Advertisement
Table of Contents
