Table of Contents
Advertisement
Change Rack Name
When you select [1: Change Rack Name] in [Rack Control Menu] and press the <Enter> key, or
press the <1> key, "Enter Rack Name" window as shown below appears.
The current rack name is displayed in the window. Enter a new rack name using a keyboard and
press the <Enter> key to determine it. If the entered rack name contains any character unavailable
for the rack name, an error is displayed. "null" (no rack name) is acceptable. In this case, delete all
characters in the field, and press the <Enter> key. If you use the current rack name as is, press the
<Esc> key to go back to [Rack Control Menu].
NOTE:
'A' to 'Z', 'a' to 'z', '0' to '9', and '- ' (hyphen)
Up to 32 characters are accepted.
See "Change CPU Blade Name" for details of key operation.
If the entered rack name contains any character unavailable for the rack name, an error as shown
below is displayed.
Press the <Esc> key to go back to [Rack Control Menu].
Characters available for blade name are as shown below.
- 338 -
Advertisement
Table of Contents
