Table of Contents
Advertisement
Chapter 2
Installation/Removal of EM Card
Two EM cards can be installed in the slots located at the front of Blade Enclosure.
This section describes how to install the EM card in Blade Enclosure , and notes on using the EM
card.
IMPORTANT:
The EM card may be installed or removed by any user. However,
NEC does not assume any liability for damage to devices or the
server or malfunctions of the server resulted from installation by the
user. NEC recommends you ask your service representative for
install or removing the EM card.
Make sure to use only cables authorized by NEC. Repair of the
server due to malfunctions, failures, or damage resulted from using
an unauthorized cables will be charged.
-
17
-
Advertisement
Table of Contents
