Table of Contents
Advertisement
Boot Control
The EM card can specify following items listed below for a CPU Blade.
Blade Boot Priority
BIOS Configuration
Boot Device
NIC Partitioning
Logical Group Mapping
vIO Control
With this feature, boot configuration such as iSCSI boot and PXE boot can be configured without
the BIOS setup menu.
NOTE:
boot control feature.
When you click [Boot Control] on menu bar, the screen as shown below appears.
IMPORTANT: With EM card of firmware revision 05.00 or later, be
sure to use BIOS 1025 or later to use the Boot Control feature on B120a,
B120a-d, or AD106a.
Note, however, BIOS 2028 or former has the following restriction:
"DHCP" for [Initiator IP Configuration] is not supported. All the
initiator IP parameters should be set manually.
The BIOS of CPU blade and mezzanine card must support this
- 164 -
Advertisement
Table of Contents
