setdate
Outline
Set date and time in EM card.
Syntax
setdate [<YYYY/MM/DD HH:MM:SS>]
Parameter
<YYYY/MM/DD HH:MM:SS>
Explanation: Specify date in Year/Month/Day Hour:Minute:Second format.
When not specified
Explanation: Shows the current date and time.
Details
Set the date and time of the clock built-in the EM card (RTC). Specify the year in 4-digit
Christian era and two-digit hour (0 to 23). If no value is specified for the parameter, the
current date and time is displayed. When two EM cards are installed, the setting is
reflected to both cards. This command can be executed in the active EM card only.
Notes
None
Examples
------------------------------------------------------------------------
$ setdate 2006/07/08 09:10:11
------------------------------------------------------------------------
------------------------------------------------------------------------
$ setdate
2006/07/08 09:10:20
------------------------------------------------------------------------
-
93
-