Table of Contents
Advertisement
If the confirmation password does not match the new password, an error as shown below appears.
Press the <Esc> key to go back to the [OSD Setup Menu].
IMPORTANT:
menu asking you whether to save changes or not appears when you exit
from the OSD Setup menu. If you select [No (does not save)], the
change you have made is discarded and the password remains
unchanged. If you forget the password, clear setup information.
For detail, see the section [3. Using Command Line Console Feature]
[Command Reference] [updateopc -c]
Save OSD Setup
If you have changed setup data, the confirmation menu asking you whether to save changes or not
appears when you exit from the OSD Setup menu. Press the <Y> key to save changes. Press the
<N> key or <Esc> key to discard changes. The settings saved here is retained even when the Blade
Enclosure is powered off.
If you have changed the password, the confirmation
-
345
-
Advertisement
Table of Contents
