Table of Contents
Advertisement
HW-RAID Select
Select a disk array controller (RAID Controller) you want to use.
If you select [HW-RAID] on [HDD (Onboard Storage) Configuration], the screen as shown below
appears.
Description of parameters are shown below:
DAC (Onboard CPU Blade):
Use the onboard DAC card on CPU Blade.
DAC Mezzanine Card:
Use DAC Mezzanine card installed in the option card slot .
DAC (Onboard I/O Blade):
Use onboard DAC card on I/O Blade.
NOTE:
location as the port selected for PXE boot cannot be selected.
A disk array controller that has been installed at the same
-
195
-
Advertisement
Table of Contents
