Table of Contents
Advertisement
Chapter 5
SIGMABLADE Monitor
This section explains how to use the SIGMABLADE monitor.
Components of SIGMABLADE Monitor
The SIGMABLADE monitor is composed of LCD, buttons, and LEDs. Various features are
activated by pressing the button and provided in menu format.
Power LED
LED Indication
When the EM card is connected and operated normally, the EM card controls LED indication.
LED name
Indication
Power LED
On (green)
Off
Status LED
On (green)
On (amber)
On (red)
ID LED
On (blue)
Off
LCD
ID LED
Status LED
Description
Goes on green when the Blade Enclosure is powered on.
Goes off when the Blade Enclosure is powered off.
Goes on green when the Blade Enclosure is powered on and all
the modules work normally.
Goes on amber when any of modules is faulty.
Wait for a while. When diagnostic test completes, the LED goes
on green.
Goes on red when a fatal error occurred. This LED goes on red
when the EM card is not connected properly or is not operating
normally. Check LCD indication.
Goes on blue when the [ID] button is pressed or the command to
turn on the ID LED is issued from the remote console.
Goes off when the [ID] button is pressed.
- 286 -
[Menu] button
[ID] button
[][][][]
buttons
[Enter] button
Advertisement
Table of Contents
