Table of Contents
Advertisement
Operating CPU Blade
When you select one of the menus [2] to [6] in [Blade Control Menu], a request for operating the
CPU blade is issued to the EM card. Then the EM card operates CPU blade.
[2: Push Power Button]
Performs operation equivalent to pressing the POWER switch of the CPU blade.
[3: Push Power Button and Hold]
Performs operation equivalent to pressing the POWER switch of the CPU blade for 4
seconds or longer.
[4: Push Reset Button]
Performs operation equivalent to pressing the RESET switch of the CPU blade.
[5: Push Dump Button]
Performs operation equivalent to pressing the DUMP switch of the CPU blade.
[6: Push ID Button]
Performs operation equivalent to pressing the ID switch of the CPU blade.
When the request for operation is accepted normally, an indication as shown below appears.
Press the <Esc> key to go back to the [Blade Control Menu].
If the request for operation is rejected, an error message as shown below is displayed.
Press the <Esc> key to go back to the [Blade Control Menu].
IMPORTANT:
EM card or the CPU blade works normally.
If the request for operation is rejected, check if the
- 336 -
Advertisement
Table of Contents
