Boot - NEC Express5800 Series User Manual

Chapter 1 About US320f

4.4.7 Boot

If you move the cursor to Boot, the Boot menu appears.
This menu contains a list showing the sequence in which devices are booted. The operating system is booted from the first
device on this list. If booting fails for some reason, such as because that device does not contain the operating system, the
OS will be booted from the next device on the list.
To change the device from which the OS is booted, move the cursor to the corresponding device by using the up and down
arrow keys ( and ) and press the plus key (+) to move the device to the top of the list, or the minus key (–) to move the
device to the bottom of the list.
The factory-set boot sequence is shown below.
1. Windows Boot Manager
2. Storage device
3. Network device
4. UEFI device
The actual screen is as follows:
The items that can be set on the Boot menu screen and their functions are described below.
Item
Full Screen Logo
Network Device BBS Priorities
/ Boot Option #1
/ Other devices
Hard Drive BBS Priorities
/ Boot Option #1
/ Other devices
[ ]: Factory setting
Realtek PXE Boot is not supported.
46
Parameter
[Enable]
Do not change this setting.
Disable
[Realtek ...]
Do not change this setting.
Other devices
[P0: SATA ...]
Other devices Do not change this setting.
Express5800/US320f User's Guide
4. Setting up the System BIOS
Description