Table of Contents
Advertisement
SX-AuroraTSUBASA A300-8 User's Guide
1.4 Server Chassis Features
Control Panel
There are two buttons located on the front of the chassis: a power on/off button and a reset
button. In addition there are six LEDs. The locations of these buttons and LEDs on the control
panel are described below. See Chapter 4 for details on the control panel connections.
Item
Feature
1
Power Button
2
Reset Button
3
Power LED
4
HDD LED
5
NIC1 LED
6
NIC2 LED
7
Universal Information LED
8
Power Fail LED
1
2
3
4
5
6
7
8
Figure 1-1. Control Panel View
Control Panel Features
Description
The main power switch applies or removes primary power from the power
supply to the server but maintains standby power. To perform most maintenance
tasks, unplug the system to remove all power.
The reset button is used to reboot the system.
Indicates power is being supplied to the system power supply units. This LED is
illuminated when the system is operating normally.
Indicates IDE channel activity. SAS2/SATA drive and/or DVD-ROM drive activity
when flashing.
Indicates network activity on GLAN2 when flashing.
Indicates network activity on GLAN1 when flashing.
See the following table for the status shown by this LED.
Indicates a power supply module has failed.
7
Advertisement
Table of Contents
