Access Level; Version Information Menu - Dover markem-imaje 5200 Service Manual

SECTION 4 Diagnostic Tools
2.1

Access Level

2.2

Version Information Menu

4–6
Access to various menus is restricted to different levels of users.
The Access Level parameter is used to temporarily change the
access level from the default to a different level.
Most of the Machine Diagnostics menus require Level 3 access.
Some menus can only be accessed by Markem-Imaje service
personnel.
• None: Can preview, find, and select jobs, shut down the
machine, and use the Access Level parameter.
• Level 1: Can preview, find, and select jobs, modify some
printhead parameters, and shut down the machine.
• Level 2: Can perform all Level 1 functions plus modify some
Machine Setup parameters.
• Level 3: Can perform all Level 1 and 2 functions, modify many
Machine Setup parameters, and has access to Machine
Diagnostics.
• Level 4: Can perform all Level 1, 2, and 3 functions plus
functions that can be performed only by Markem-Imaje service
personnel.
Access levels can be enabled, disabled, and configured using the
Password Settings parameter. For more information, refer to
Installation and Setup Guide, Section 3, Machine Setup Menu,
Password Settings.
The Version Information menu is used to view version information of
the firmware on the control board, the VPC board, and the printhead
interface board. To display the Version Information menu, select
Version Information from the Diagnostics menu.
0855855eng 6/08