Foreseen Use; Misuse; Training Programs - Dover markem-imaje 5200 Service Manual

4.5

Foreseen Use

4.6

Misuse

4.7

Training Programs

0855855eng 6/08
SECTION 1 General Information
The Model 5200/5400 is designed as an industrial case coder,
intended for printing on corrugated containers.
This coder was designed for or adapted by Markem-Imaje to a
specific application at the time of sale. This application is the
intended use.
Using this coder for anything other than the specific application can
be a misuse. Contact your Markem-Imaje representative before
attempting to use this coder for anything other than the intended
use.
Misuses include but are not limited to:
• Failing to observe instructions or directives pertaining to the
installation, use, and repair of this coder, including the use and
disposal of related chemicals.
• Operating an unserviceable, incomplete, or modified coder.
• Not observing safety messages and labels.
• Permitting an unqualified person to operate or repair this coder.
See "Markem-Imaje Training Programs."
• Combining or interfacing other equipment with this coder for
anything other than the intended use.
• Using supplies or materials that are not recommended for use
with this coder, which may produce unsatisfactory or unexpected
results.
Operators, maintenance personnel, and service technicians are
considered qualified when they have gained, through training and
experience, an understanding of safe and correct methods of
operation, maintenance, or repair.
Markem-Imaje conducts training programs. In addition to ongoing
courses about current machine models, customers are invited to
inquire about any training need.
1–9