Ink Pump; Printhead 1 - 4 Low Vacuum - Dover markem-imaje 5200 Service Manual

SECTION 4 Diagnostic Tools
2.3.9
2.3.10
4–10

Ink Pump

Access Level: Read–3
The Ink Pump parameter counts the number of pump strokes.

Printhead 1 - 4 Low Vacuum

Parameter Options: Vertical - 0.00–5.00 In. H
Access Level: Read–3; Write–4
The PH Low Vacuum menu is used to determine the low vacuum
settings for each printhead position, and can only be changed by
Markem-Imaje service personnel.
For information on custom vacuum settings, refer to Installation
and Setup Guide, Section 3, Custom Vacuum.
Horizontal - 0.00–5.00 In. H
Down - 0.00–5.00 In. H
0 (default = 1.73)
2
0 (default = 2.13)
2
0 (default = 3.00)
2
0855855eng 6/08