Remote Control - Panasonic BL-WV10A Service Manual

Indicator Color
Timer/Busy Green
Green
(flashing)
Off
Amber
(flashing)
Power Green
Red
(flashing)
Amber
(flashing)
ALERT Green
Off
Sensor Amber
Orange
(flashing)
Off
LAN 1--4 Green
Wireless Green

5.2. REMOTE CONTROL

Description
Timer/Sensor recording has been
set.
Turn off by pressing [TIMER] on
the remote control.
Timer/Sensor recording cannot be
turned on due to insufficient free
space on the SD memory card. The
indicator will flash for about 6
seconds.
Also flashes when the timer
recording setting is invalid (no SD
memory card installed, etc.)
Timer/Sensor recording is not set.
Turn on by pressing [TIMER] on
the remote control.
Data is either being written to or
read from the SD memory card.
The unit is turned on.
A problem was detected during the
power-on diagnostics.
Power-on diagnostics are in
progress.
The buzzer is turned on. Turn off
by pressing [ALERT] on the remote
control.
The buzzer is turned off. Turn on
by pressing [ALERT] on the remote
control.
The sensor is on.
The indicator will flash every 0.5
seconds when a camera is being
detected by the sensor. After
detection, the indicator will flash
every second. To turn off the
indicator.
The sensor is off.
The unit is connected to wired
cameras or to a router.
The unit is connected to wireless
cameras.
12