Laser Radiation Information - Panasonic LP-RV Series Safety Manual

Laser marker
Hide thumbs Also See for LP-RV Series:
Table of Contents

Advertisement

Available languages

Available languages

Laser Radiation Information

This product falls into Class 4 laser (marking laser) and Class 2 laser (guide laser) based on the classifications of IEC
60825-1 "Safety of laser products". Perform the safety protection measure before using the system. Refer to "Safety
Protection Measures for Users" (P.29) for details.
Marking Laser (Class 4)
Class 4 laser refers to "Laser products for which intrabeam viewing and skin exposure is hazardous and for which the
viewing of diffuse reflections may be hazardous. These lasers also often represent a fire hazard."
Item
Wavelength *1
Laser medium
Max. output *1
Mode of operation
Pulse cycle
Pulse duration *1
Class
NOHD *2
MPE *3
NHZ represents the area where the amount of beam irradiance or
radiant exposure exceeds the maximum permissible exposure to
NHZ
eyes. It is equal of NOHD at a maximum.
NHZ varies depending on the reflectance or surface condition of
works. Please calculate it based on the actual working environment.
*1 : The wavelength, maximum output power, and pulse duration in this table indicate the maximum value that can be
output from a laser oscillator itself. For the specifications under the normal operation, refer to "Setup/Maintenance
Guide".
*2 : "NOHD" means the distance that the area where the amount of beam irradiance or radiant exposure becomes equal
to the maximum permissible exposure to eyes.
*3 : MPE in this table is a value calculated with exposure time set to 10 seconds.
Guide Laser and Pointer (Class 2)
The laser classified into the Class 2 refers to "Laser products that emit visible radiation in the wavelength range from 400
nm to 700 nm that are safe for momentary exposures but can be hazardous for deliberate staring into the beam."
Item
Wavelength
Laser medium
Max. output *1
Mode of operation
Class
*1 : Sum of the guide laser and pointer values.
LP-RV200P
1064nm
Yb: Fiber
50W
Pulsed
0.5μs to 500μs
1ns to 1000ns
Class 4 (IEC 60825-1)
approx. 120m
2
16.8W/m
LP-RV200P
655nm
Semiconductor laser
1mW
CW (Continuous wave)
Class 2 (IEC 60825-1)
MJEC-LPRV-SAFETY-4
Remarks
Invisible beam
-
-
-
-
-
-
Nominal ocular hazard
distance
Maximum permissible
exposure
Nominal hazard zone
Remarks
Visible beam
-
-
-
-
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lp-rv200p

Table of Contents