Leica CM3050 S Service Manual page 164

Chapter 3
4
Service Manual / Leica CM3050 S
4. Control panel 1
Menu button
The menu symbol itself (4) remains the same. Howe-
ver, the sequence of indication of the individual
values has been changed.
By pressing the menu button, the different parame-
ters are displayed in the following order (press
menu button once per parameter):
1. Chamber temperature
2. Specimen temperature
3. Preselected value of preset counter
(Press
ter)
4. Maximum (= lowest) temperature of specimen
head
5. Time (real time)
6. Defrost time (= time when defrost cycle starts)
7. Duration of defrost cycle (Chamber)
5. Control panel 2
/
When the instrument is in sectioning mode, (indica-
tion TRIM --> OFF!) display indication will go to
sectioning thickness selection by pressing
.
Displayed is always the section thickness value
which has been selected last.
Press
value.
Selectable section thickness selection range:
10 -
20 -
60 - 100 µm
100 - 300 µm
Version 1.0 12/00
© Leica Microsystems
3.18 Control elements (supplement)
to activate / deactivate preset coun-
- Tasten
or to select a new section thickness
0 - 2 µm in 0.5-µm
2 - 10 µm in 1-µm
20 µm in 2-µm
60 µm in 5-µm
in 10-µm
in 50-µm
or
steps,
steps,
steps,
steps,
steps,
steps.
Page 72