Figure 4-1 Removing the Server out of the Rack
After installation or maintenance, slide the server all the way back into the
rack and secure it in place.
For more information on how to install the server into the rack, refer to Rack
Server Installation Guide.
4.4
Disassembly/Reassembly Process
Before installation or removal of any hardware, always ensure all data is
backed up properly.
Disconnect the power cord(s) of the server and all attached devices from the
power outlet.
There is no need to remove power from the server when replacing hot-swap
components.
If more than one option is to be installed, read the installation instructions
for all the hardware options and identify similar steps to streamline the
installation process.
Item appearance may differ depending on actual models.
25