Table of Contents
Advertisement
4.3
Pre-Disassembly Instructions
Read the installation instructions for all the hardware operations before
disassembling or re-assembling the components. All prerequisites must be
completed prior to starting installation or maintenance.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool down before touching.
To prevent damage to electrical components, properly ground the server before
installation. Improper grounding may cause electrostatic discharge.
Do the following prior to installation or maintenance:
1.
Shut down the server.
2.
Remove all cables from the server.
3.
Remove the server out of the rack:
1.
To reduce the risk of personal injury or equipment damage, make sure that
the rack is adequately stabilized before you pull a component out of the
rack.
2.
To reduce the risk of personal injury, be careful when sliding the server into
the rack. The sliding rails could pinch your fingers.
a. Loosen the screws in the left and right mounting ears on the front panel.
b. Gently slide and remove the server out of the rack.
24
Advertisement
Table of Contents
