Inspur NF3180A6 User Manual page 4

Abstract
This manual describes the server's specifications, features, hardware setup,
warranty information and troubleshooting, which will help users to
understand how best to utilize the server and all its functionalities.
Target Audience
This manual is intended for:
Technical support engineers

Product maintenance engineers

It is recommended that server installation, configuration, or maintenance is
performed by only experienced technicians with knowledge in servers.
Safety Precautions
If your purchases do not include Inspur on-site installation service, make

sure that you inspect the shipping cartons before unpacking the
equipment. If a shipping carton appears severely damaged, water
immersed, or the seal or pressure-sensitive adhesive tape (PSA) is
broken, report this based on your purchase channel. If you purchased
from a third-party supplier, contact your supplier directly; if you
purchased through Inspur direct sales stores, call Inspur service hotline 1-
844-860-0011/1-760-769-1847 for technical support.
For your safety, please do not disassemble the server's components,

extend configuration or connect other peripherals arbitrarily. You can
contact Inspur for our support and guidance.
Before disassembling the server's components, please be sure to

disconnect all the cables connected to the server.
Please install the product-compatible operating system and use the

driver that comes with the server or provided by Inspur. You can go to our
official site, on the Top Navigator, click on Support > Product Support >
Drivers, then find the correct driver of your product based on the prompt.
An incompatible operating system or a non-Inspur driver may cause
compatibility issues and affect the normal use of the product. Inspur will
Inspur Proprietary and Confidential. All Rights Reserved.
Foreword