Table of Contents
Advertisement
3.
Install the top cover.
4.
Verify that the fan status LED is off after powering on the server.
4.4.5
DIMM Replacement
Mixed use of RDIMMs and LRDIMMs is not allowed.
To remove the DIMM:
1.
Remove the top cover.
2.
Disconnect the cable of the super-capacitor.
3.
Remove the air duct.
4.
Remove the beam.
5.
Locate the DIMM you want to replace.
6.
Remove the DIMM:
a. Push the release tabs on both ends of the DIMM slot outward to unlock it.
Gently lift and remove the DIMM from the slot.
Make sure the release tabs on both sides of the DIMM slot are fully opened.
Figure 4-8 Removing the DIMM
b. Put it into the memory box.
To install the DIMM:
1.
Take the new DIMM out from the memory box.
30
Advertisement
Table of Contents
