Table of Contents
Advertisement
To remove the PSU:
1.
Grasp the handle and press the blue release tab to release the PSU. Pull the
PSU out of the power supply bay.
Figure 4-17 Removing the PSU
2.
Put it into an antistatic bag.
To install the PSU:
1.
Take the new PSU out from the antistatic bag.
2.
Grasp the handle and push the PSU into the power bay until it snaps into
place. Make sure the blue release tab is on the right of the PSU.
3.
Power on the server and make sure that the PSU LED is solid green.
4.4.10 OCP Card Replacement
To prevent damage to the server or expansion cards, power down the server and
remove all AC power cables before removing or installing the OCP module.
To remove the OCP card:
1.
Loosen the thumbscrew securing the OCP card to the server anticlockwise.
39
Advertisement
Table of Contents
