Oracle Auto Service Request Software Activation - Oracle SPARC T8-1 Installation Manual

Oracle Auto Service Request Software Activation

->
Set the changes to the SP network parameters.
7.
-> set /SP/network commitpending=true
Set 'commitpending' to 'true'
Note -
been updated.
Related Information
Server Administration
■
"Configure the Preinstalled OS" on page 63
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 63
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 65
■
"Oracle Solaris OS Configuration Parameters" on page 67
■
Oracle ILOM documentation
■
Oracle Auto Service Request Software Activation
When you have completed initial installation and Oracle Solaris configuration, you can activate
Oracle Auto Service Request (Oracle ASR) software for the server.
Oracle ASR software provides the ability to resolve problems faster by automatically opening
service requests for Oracle's qualified server, storage, and Engineered System products when
specific faults occur.
Parts are dispatched upon receipt of a service request sent by Oracle ASR. In many cases,
Oracle engineers are already working to resolve an issue before you're even aware that a
problem exists.
Oracle products with Oracle ASR securely transport electronic fault telemetry data to Oracle
automatically to help expedite the diagnostic process. The one-way event notification requires
no incoming Internet connections or remote access mechanism. Only the information needed to
solve a problem is communicated to Oracle.
70 SPARC T8-1 Server Installation Guide • June 2019
pendingipnetmask = 255.255.255.0
pendingmanagementport = MGMT
sidebandmacaddress = xx:xx:xx:xx:xx:xx
state = enabled
You can type the show /SP/network command again to verify that the parameters have