Table of Contents
Advertisement
Attach Slide Rail Assemblies to the Rack
7.
Starting with either the left or right side of the rack, align the rear of the slide rail
assembly against the inside of the rear rack rail, and push until the assembly
locks into place with an audible click.
Align the front of the slide rail assembly against the outside of the front rack rail,
8.
and push until the assembly locks into place with an audible click.
9.
Repeat this procedure to attach the slide rail assembly to the other side of the
rack.
10.
If available, extend the antitip legs or antitilt bar at the bottom of the rack.
Refer to the documentation for the rack for instructions.
34
SPARC T8-1 Server Installation Guide • June 2019
Advertisement
Table of Contents
