W&H teon + RID-200 Operating Instructions Manual page 99

Disinfector
Table of Contents

Advertisement

Fan cooling
After drying, cooling of the wash load can be accelerated by the dry-
ing system. To do so, the drying system fan runs with the heating
switched off, cooling the interior of the wash cabinet.
   ...
Cooling down with fan
         
Cooling down with fan
No
Set the time
No
The drying system fan is not switched on.
Set the time
The drying system fan will run for a specified duration.
Select an option using the  and  arrow buttons and confirm your
selection with OK.
When
Set the time
has been selected, the duration of the cooling
down pause must then be set.
The setting value is entered in increments of 10 seconds. The pos-
sible range is shown in the bottom line of the display.
Use the arrow buttons  (higher) and  (lower) to set the cooling
down duration.
Press OK to save the setting.
Cooling down with fan
120
s
(10 - 200
s )
Programme settings
99

Advertisement

Table of Contents
loading

Table of Contents