Table of Contents
Advertisement
Settings
HEPA filter re-
placement
Cleaning the fil-
ters in the wash
cabinet
Cleaning the
A 800 tubular filter
Activating and
setting the inter-
val
64
Filter maintenance
The air filter in the drying system must be replaced regularly with a
new one. For more information on changing the filter, see "Mainten-
ance / Changing the HEPA filter".
The filters in the wash cabinet must be checked and cleaned daily,
see "Maintenance/Cleaning the filters in the wash cabinet".
A counter in the controls can be activated to remind you of the re-
quired cleaning at regular intervals.
The A 800 tubular filter can be used in special injector bars on various
mobile units and baskets and must be cleaned at least once a week.
Follow the cleaning instructions in the operating instructions for the
tubular filter.
For the weekly cleaning, a counter in the controls can be activated to
remind you of the required cleaning at regular intervals.
Open the menu as follows:
button
Settings
Filter maintenance
Filter combination
Filter combination
Active
Inactive
Active
–
The cleaning interval is activated.
The
Active
selection allows you to reset the counter or set the
cleaning interval.
–
Inactive
The cleaning interval is deactivated.
Select an option using the and arrow buttons and confirm your
choice with OK.
Tubular filter
or
Tubular filter
Active
Inactive
Advertisement
Table of Contents
