Table of Contents
Advertisement
Moving a programme: allocating programme selection
buttons
You can sort the programme selection list to suit your requirements
and therefore also allocate the programme selection buttons ,
and .
Open the menu as follows:
button
Further settings
Move programme
Move programme
1.
2.
All released programmes are shown in the programme list (see "Fur-
ther settings/Programme release"). A programme's position in the
programme list is decisive for allocating the programme selection but-
tons. Programmes are numbered from 1 - n. The first three pro-
grammes in the list are allocated to the programme selection buttons;
for example:
1. Vario TD Dental
–
2. Rinsing
on programme selection button
–
3. Drain
on programme selection button
–
4. Vario TD Intensive
–
– etc.
Use the and arrow buttons to select the programme you would
like to move.
Confirm your selection with OK.
Now you can move this programme within the list.
Use the and arrow buttons to move the programme to the po-
sition you want.
Press OK to save the programme to the selected position.
The programme which was previously saved to this position and all
subsequent programmes are moved down by one position.
The process can be repeated as often as you wish.
Press the button to exit the menu.
Vario TD Dental
Rinsing
on programme selection button
Further settings
81
Advertisement
Table of Contents
