Table of Contents
Advertisement
Programme se-
lection buttons
Programme list
Starting a pro-
gramme using
delay start
Selecting a programme
Select a programme using programme selection buttons ,
or .
Press the button and
use the and arrow buttons to highlight a programme and con-
firm your selection with OK.
Vario TD Dental
Temperature
Duration
The LED in the button selected lights up and the relevant programme
appears in the display. The LED in the Start/Stop button also starts to
flash.
Another programme can be selected at any time before a programme
has started. Once it has started, programme selection is locked.
The different programmes and their uses are described in "Pro-
gramme chart" at the end of these operating instructions.
Always select the programme depending on the type of load and de-
gree and type of soiling, or on infection prevention issues.
Starting a programme
Close the door.
When the door is closed, the LED in the button will light up.
Press the Start/Stop button.
The LED in the Start/Stop button will light up constantly and the
LED in the button will go out.
The start of a programme can be delayed, for example, to benefit
from economy rates of electricity at night. Starting from the pro-
grammed time, a delay start time between 1 minute and 24 hours can
be selected in one minute increments (see "Settings /Time of day").
Delay start must be switched on (see "Settings /Delay start").
If soiling is left to dry on the load for longer, the reprocessing result
can be adversely affected. There is also a risk of corrosion for
stainless steel items.
55 °C
50
Min
Operation
53
Advertisement
Table of Contents
