Table of Contents
Advertisement
Operation
Programme can-
celled due to a
fault
Cancelling a pro-
gramme manually
Restarting the
programme
58
Cancelling a programme
If a programme is cancelled, the items in the washer-disinfector
must be reprocessed again.
Be careful when opening the door.
The load could be hot. Danger of scalding, burning, and chemical
burns.
The programme stops and an error message appears on the display.
Take appropriate steps to resolve the fault, depending on its cause
(see "Problem solving guide").
A programme which is already running should only be cancelled if
strictly necessary, e.g. if the load is moving about significantly.
Press and hold the Start/Stop button until the display changes to
the following view:
Cancel programme
Yes
using the and arrow buttons.
Select
By pressing the OK button the programme is cancelled. Entry of a
PIN code may also be required (see "Further settings/Code").
If no button is pressed for several seconds, or if the process is can-
celled using the button, the display will revert to the programme
sequence display.
Start the programme again or select a new programme.
No
Yes
Advertisement
Table of Contents
