Table of Contents
Advertisement
Press the catches towards each other and pull the coarse filter up-
wards to remove it.
Remove the fine filter which sits loosely between the coarse filter
and the microfine filter.
Remove the flat filter last.
Clean the filters.
Re-insert the filter combination in the reverse order. Ensure ...
– ... that the flat filter sits flat in the base of the wash cabinet.
– ... that the coarse filter has securely clicked into place in the mi-
crofine filter.
– ... that the microfine filter is tightly screwed in as far as it will go.
If a cleaning interval was set for the filters in the wash cabinet, this
interval must be reset after cleaning; see "Settings /Filter main-
tenance.
Maintenance
107
Advertisement
Table of Contents
