Table of Contents
Advertisement
Drying
Activating and de-
activating drying
If drying is deactiv-
ated
The additional "Drying" function accelerates the drying process at the
end of the programme.
When the drying function is activated and the door is closed, the dry-
ing system feeds heated and HEPA-filtered air into the wash cabinet
for active drying of the load. The heated air is discharged through the
steam condenser and can be cooled down if necessary (see "Further
settings/Air cooling").
The drying function can be pre-selected for all programmes with a
drying phase or can be retrospectively switched on or off every time a
programme is selected (see "Settings / Drying").
Drying is activated or deactivated prior to programme start by press-
ing the button. The LED in the button indicates whether the ad-
ditional function is on or off. The drying time of the programme can
also be changed.
When the drying function is activated, the programme runs longer.
Select a programme.
Press the button before the programme start.
If W&H Service has set the drying duration so that it can be changed,
you can set a new drying duration. Otherwise the pre-set drying dura-
tion cannot be changed.
If the drying function has been previously deactivated, it can be activ-
ated by pressing a button.
If the time is set as changeable, the preset drying time for this pro-
gramme is shown in minutes (min) in the display and the possible set-
ting range is displayed in the bottom line.
Alter the drying duration using the arrow buttons (higher) and
(lower), and save the setting with OK. Drying is now activated.
Drying
30
Min
Min
)
(0 - 120
Operation
55
Advertisement
Table of Contents
